{"title":"Display Plinths","description":"\u003cp\u003eOffering the largest and most comprehensive selection of display plinths anywhere online. Designed for use in competitive painting competitions, cabinet and window displays and so much more. Hopefully we have covered all bases... if not then more designs will be on their way!\u003c\/p\u003e","products":[{"product_id":"round-resin-display-plinths","title":"Round Resin Display Plinths - 25mm tall","description":"\u003cp\u003e25mm tall round black resin display plinths, cast in strong black resin. \u003cspan\u003eAfter casting each plinth is machined sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 160mm, 130mm, 100mm, 90mm, 80mm, \u003cspan\u003e70mm, 65mm,\u003c\/span\u003e 60mm, 55mm, 50mm, 45mm, 40mm, 35mm, 30mm and 20mm in diameter. \u003cspan\u003eThe finished height is approximately 25mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. I will always strive to cast items immediately and aim to get orders out the next day. \u003c\/p\u003e\n\u003cp\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out.  \u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"160mm","offer_id":36809651290279,"sku":"DIS-RND-160-025","price":23.0,"currency_code":"GBP","in_stock":true},{"title":"130mm","offer_id":32725362704517,"sku":"DIS-RND-130-025","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"100mm","offer_id":32725362737285,"sku":"DIS-RND-100-025","price":16.0,"currency_code":"GBP","in_stock":true},{"title":"90mm","offer_id":43891130892523,"sku":"DIS-RND-090-025","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"80mm","offer_id":32725362770053,"sku":"DIS-RND-080-025","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"70mm","offer_id":43424768753899,"sku":"DIS-RND-070-025","price":10.5,"currency_code":"GBP","in_stock":true},{"title":"65mm - Fits 60mm Base","offer_id":43424768819435,"sku":"DIS-RND-065-025","price":9.5,"currency_code":"GBP","in_stock":true},{"title":"60mm","offer_id":32725362802821,"sku":"DIS-RND-060-025","price":9.0,"currency_code":"GBP","in_stock":true},{"title":"55mm","offer_id":43891131252971,"sku":"DIS-RND-055-025","price":8.0,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":32725362835589,"sku":"DIS-RND-050-025","price":7.0,"currency_code":"GBP","in_stock":true},{"title":"45mm","offer_id":43891131318507,"sku":"DIS-RND-045-025","price":6.25,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":39905913045159,"sku":"DIS-RND-040-025","price":5.25,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":39905918845095,"sku":"DIS-RND-035-025","price":4.75,"currency_code":"GBP","in_stock":true},{"title":"30mm - 30mm Tall","offer_id":45485604241643,"sku":"DIS-RND-030-030","price":4.5,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":45485604438251,"sku":"DIS-RND-030-025","price":4.25,"currency_code":"GBP","in_stock":true},{"title":"20mm","offer_id":45485604765931,"sku":"DIS-RND-020-025","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/round3.jpg?v=1588017989"},{"product_id":"tall-round-resin-display-plinths","title":"Round Resin Display Plinths - 65mm Tall","description":"\u003cp\u003eTall round resin display plinths, cast in strong black pigmented resin. After casting each plinth is machined sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/p\u003e\n\u003cp\u003eSome sizes have been designed hollow, this serves to reduce weight and aid shipping. A wide rim 10 - 15 mm rim has been left to allow somewhere to drill for transportation magnets (not supplied). \u003cspan\u003eHollow plinths will be supplied with a sanded top surface finished to around 240 grit (some light scratches may remain).\u003c\/span\u003e Hollow plinths are noted in the dropdown menu. \u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 160mm, 130mm, 110mm, 100mm, 90mm 80mm, 70mm, 65mm, 60mm, 55mm, 50mm, 45mm , 40mm, 35mm and 30mm in diameter. The finished height is approximately 65mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\" title=\"inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"160mm - Hollow","offer_id":43976087109867,"sku":"DIS-RND-160-065","price":36.0,"currency_code":"GBP","in_stock":true},{"title":"130mm - Hollow","offer_id":43976084816107,"sku":"DIS-RND-130-065","price":30.0,"currency_code":"GBP","in_stock":true},{"title":"110mm - Hollow","offer_id":33881601409157,"sku":"DIS-RND-110-065","price":26.0,"currency_code":"GBP","in_stock":true},{"title":"100mm - Hollow","offer_id":33881601441925,"sku":"DIS-RND-100-065","price":22.0,"currency_code":"GBP","in_stock":true},{"title":"90mm - Hollow","offer_id":43891130564843,"sku":"DIS-RND-090-065","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"80mm - Hollow","offer_id":33883343618181,"sku":"DIS-RND-080-065","price":18.5,"currency_code":"GBP","in_stock":true},{"title":"70mm - Hollow","offer_id":43424731234539,"sku":"DIS-RND-070-065","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"65mm - Hollow (Fits 60mm Base)","offer_id":43424731332843,"sku":"DIS-RND-065-065","price":15.5,"currency_code":"GBP","in_stock":true},{"title":"60mm - Hollow","offer_id":33881601507461,"sku":"DIS-RND-060-065","price":14.5,"currency_code":"GBP","in_stock":true},{"title":"55mm - Hollow","offer_id":43891130630379,"sku":"DIS-RND-055-065","price":13.5,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":33881601540229,"sku":"DIS-RND-050-065","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"45mm","offer_id":40023006412967,"sku":"DIS-RND-045-065","price":10.5,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":33881727139973,"sku":"DIS-RND-040-065","price":8.5,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":39905829781671,"sku":"DIS-RND-035-065","price":6.5,"currency_code":"GBP","in_stock":true},{"title":"30mm - 60mm Tall","offer_id":45281541357803,"sku":"DIS-RND-030-065","price":5.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/Tallround4.jpg?v=1588004423"},{"product_id":"oval-resin-display-plinths-25mm-tall","title":"Oval Resin Display Plinths - 25mm tall","description":"\u003cp\u003e25mm high Oval resin display plinths,\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecast in strong black pigmented resin. Sizes I am currently producing are based off of the popular oval sizes used in tabletop gaming figures. You can find printable diagrams of each oval size \u003ca title=\"Oval Plinth Sizes\" href=\"https:\/\/www.dropbox.com\/s\/ttf5l26bz6erwl3\/Oval%20Sizes.pdf?dl=0\"\u003eHERE\u003c\/a\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. The finished height is approximately 25mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be \u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of \u003cstrong\u003eup to a week\u003c\/strong\u003e \u003cspan\u003eprior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast \u003c\/span\u003e\u003cspan\u003eitems\u003c\/span\u003e\u003cspan\u003e immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid, and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"195mm x 150mm","offer_id":44490896769259,"sku":"DIS-OVL-195-150-025","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"170mm x 135mm","offer_id":44490892771563,"sku":"DIS-OVL-170-135-025","price":22.0,"currency_code":"GBP","in_stock":true},{"title":"170mm x 110mm","offer_id":33882012582021,"sku":"DIS-OVL-170-110-025","price":19.5,"currency_code":"GBP","in_stock":true},{"title":"150mm x 95mm","offer_id":33882012614789,"sku":"DIS-OVL-150-095-025","price":15.5,"currency_code":"GBP","in_stock":true},{"title":"120mm x 92mm","offer_id":33882012647557,"sku":"DIS-OVL-120-092-025","price":14.5,"currency_code":"GBP","in_stock":true},{"title":"105mm x 70mm","offer_id":33882012680325,"sku":"DIS-OVL-105-070-025","price":10.5,"currency_code":"GBP","in_stock":true},{"title":"90mm x 52mm","offer_id":33882012713093,"sku":"DIS-OVL-090-052-025","price":8.5,"currency_code":"GBP","in_stock":true},{"title":"75mm x 44mm","offer_id":33882012745861,"sku":"DIS-OVL-075-044-025","price":6.0,"currency_code":"GBP","in_stock":true},{"title":"60mm x 35mm","offer_id":33883040579717,"sku":"DIS-OVL-060-035-025","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/ShortOval1.jpg?v=1588010835"},{"product_id":"oval-resin-display-plinths-45mm-tall","title":"Oval Resin Display Plinths - 45mm tall","description":"\u003cp\u003e45mm high Oval resin display plinths,\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecast in strong black pigmented resin. Sizes I am currently producing are based off of the popular oval sizes used in tabletop gaming figures. You can find printable diagrams of each oval size \u003ca href=\"https:\/\/www.dropbox.com\/s\/ttf5l26bz6erwl3\/Oval%20Sizes.pdf?dl=0\" title=\"Oval Plinth Sizes\"\u003eHERE\u003c\/a\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSome sizes have been designed hollow, this serves to reduce weight and aid shipping. A wide rim 10 - 15 mm rim has been left to allow somewhere to drill for transportation magnets (not supplied). Hollow plinths will be supplied with a sanded top surface (some light scratches may remain). Hollow plinths are noted in the dropdown menu. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. The finished height is approximately 45mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\" title=\"inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast \u003c\/span\u003e\u003cspan\u003eitems\u003c\/span\u003e\u003cspan\u003e immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid, and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"170mm x 110mm - Hollow","offer_id":33883539669125,"sku":"DIS-OVL-170-110-045","price":24.0,"currency_code":"GBP","in_stock":true},{"title":"150mm x 95mm - Hollow","offer_id":33883539701893,"sku":"DIS-OVL-150-095-045","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"120mm x 92mm - Hollow","offer_id":33883539734661,"sku":"DIS-OVL-120-092-045","price":18.0,"currency_code":"GBP","in_stock":true},{"title":"105mm x 70mm - Hollow","offer_id":33883539767429,"sku":"DIS-OVL-105-070-045","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"90mm x 52mm","offer_id":33883539800197,"sku":"DIS-OVL-090-052-045","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"75mm x 44mm","offer_id":33883539832965,"sku":"DIS-OVL-075-044-045","price":9.0,"currency_code":"GBP","in_stock":true},{"title":"60mm x 35mm","offer_id":33883539865733,"sku":"DIS-OVL-060-035-045","price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/Talloval1.jpg?v=1588014917"},{"product_id":"backdrop-resin-display-plinths-3-sizes","title":"Backdrop Resin Display Plinths - Small Scoop","description":"\u003cp\u003eResin backdrop resin display plinths, as first featured in Cult of Paints Deorgard Kickstarter. Each has a flat platform with a small scoop leading into the backboard. There are five sizes of backdrop stand available, two are 50mm deep in 50mm or 65mm wide with a 80mm backboard. These two are ideal for smaller miniatures. The larger two measure 75mm deep in 75mm and 120mm wide with a 120mm backboard, perfect for larger displays, figures and busts (75mm is the Cult of paint Backdrop). The Extra Tall backdrop measures 85mm deep, 85mm wide with a 55mm high base and a 160mm backboard. Perfect for the largest of miniatures.\u003c\/p\u003e\n\u003cp\u003eEach plinth has been cast in a durable black resin and has been machine sanded on the rear face to ensure a true backdrop. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. \u003c\/p\u003e\n\u003cp\u003eFind a helpful scaled printout of both profiles \u003ca href=\"https:\/\/www.dropbox.com\/s\/5p2g6lqzbn4fzri\/Backdrop%20Plinths.pdf?dl=0\" title=\"backdrop plinth printout\"\u003eHERE\u003c\/a\u003e as well as the new XL backdrop \u003ca href=\"https:\/\/www.dropbox.com\/s\/1zddfesl8ci6ic4\/XL%20Backdrop%20Plinths.pdf?dl=0\" title=\"XL backdrop plinth\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\" title=\"inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"Small 50mm Wide","offer_id":39906902474919,"sku":"DIS-BKD-SML-050","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Small 65mm Wide","offer_id":39906902507687,"sku":"DIS-BKD-SML-065","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"Large 75mm Wide","offer_id":39906902540455,"sku":"DIS-BKD-LRG-075","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"Large 120mm Wide","offer_id":42382887452907,"sku":"DIS-BKD-LRG-120","price":34.0,"currency_code":"GBP","in_stock":true},{"title":"Extra Tall 85mm Wide","offer_id":43282261278955,"sku":"DIS-BKD-XL-085","price":36.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/Backdrop9.jpg?v=1643389628"},{"product_id":"sloped-backdrop-resin-display-plinths","title":"Sloped Backdrop Resin Display Plinths","description":"\u003cp\u003eSloped Backdrop resin display plinths, add another dimension to diorama building. Each plinth has been cast in a durable black resin and has been machine sanded on the rear face to ensure a true backdrop. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. \u003c\/p\u003e\n\u003cp\u003eThere are currently two sizes of sloped backdrop plinth available, both with the same base profile but the smaller of the two has a 60mm wide base and 95mm backboard. Whereas the larger has a 75mm wide base and 125mm backboard. \u003c\/p\u003e\n\u003cp\u003eFind a helpful scaled printout of both profiles \u003ca href=\"https:\/\/www.dropbox.com\/s\/fhepidqsi4g6thf\/Sloped%20Backdrop%20Plinths.pdf?dl=0\" title=\"sloped backdrop plinth printout\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"Small 60mm Wide","offer_id":39907162259623,"sku":"DIS-SLP-BKD-SML","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"Large 75mm Wide","offer_id":39907162292391,"sku":"DIS-SLP-BKD-LRG","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/SlopedBackdrop1.jpg?v=1620329762"},{"product_id":"round-bust-resin-display-plinths","title":"Round Bust Resin Display Plinths - 40 degree slant","description":"\u003cp\u003eRound Bust resin display plinths, cast in black resin \u003cspan\u003ewith a \u003c\/span\u003e\u003cspan\u003e40\u003c\/span\u003e\u003cspan\u003e degree slant\u003c\/span\u003e. Plinths are supplied pre-drilled with a 40mm long metal rod in either 3.2mm or 2.4mm diameter. Also available without a rod and with no drilled hole, although a shallow 3mm pilot hole will remain (this is a cast in drilling guild)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter casting each plinth is machined sanded to ensure the bottom is parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 50mm, 45mm, 40mm and 35mm in diameter. \u003cspan\u003eThe finished height is approximately 65mm to the highest point, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA scaled printout of each size can be found \u003ca title=\"Bust plinth profiles\" href=\"https:\/\/www.dropbox.com\/s\/kyfea0unszre0ge\/Bust%20Plinths%20-%20Hex%20%26%20Round.pdf?dl=0\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\" title=\"inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. I will always strive to cast items immediately and aim to get orders out the next day. \u003c\/p\u003e\n\u003cp\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out.  \u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"50mm \/ 3.2mm","offer_id":55271852933497,"sku":"DIS-RND-B40-050-R3","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ 2.4mm","offer_id":55271852966265,"sku":"DIS-RND-B40-050-R2","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ No Rod \/ No Drill hole","offer_id":55271852999033,"sku":"DIS-RND-B40-050-NR","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ 3.2mm","offer_id":39907300475047,"sku":"DIS-RND-B40-045-R3","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ 2.4mm","offer_id":40386070347943,"sku":"DIS-RND-B40-045-R2","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ No Rod \/ No Drill hole","offer_id":40386082242727,"sku":"DIS-RND-B40-045-NR","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ 3.2mm","offer_id":39907300442279,"sku":"DIS-RND-B40-040-R3","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ 2.4mm","offer_id":40386073231527,"sku":"DIS-RND-B40-040-R2","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ No Rod \/ No Drill hole","offer_id":40386085650599,"sku":"DIS-RND-B40-040-NR","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ 3.2mm","offer_id":39907300409511,"sku":"DIS-RND-B40-035-R3","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ 2.4mm","offer_id":40386074607783,"sku":"DIS-RND-B40-035-R2","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ No Rod \/ No Drill hole","offer_id":40386087125159,"sku":"DIS-RND-B40-035-NR","price":9.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/RoundBust1.jpg?v=1620333643"},{"product_id":"hex-bust-resin-display-plinths","title":"Hex Bust Resin Display Plinths - 40 degree slant","description":"\u003cp\u003eHex bust resin display plinths, cast in black resin \u003cspan\u003ewith a 40 degree slant\u003c\/span\u003e. \u003cspan\u003ePlinths are supplied pre-drilled with a 40mm long metal rod in either 3.2mm or 2.4mm diameter. Also available without a rod and with no drilled hole, although a shallow 3mm pilot hole will remain (this is a cast in drilling guild)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter casting each plinth is machined sanded to ensure the bottom is parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 50mm, 45mm, 40mm and 35mm profile. \u003cspan\u003eThe finished height is approximately 65mm to the highest point, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA scaled printout of each size can be found \u003ca title=\"Bust plinth profiles\" href=\"https:\/\/www.dropbox.com\/s\/kyfea0unszre0ge\/Bust%20Plinths%20-%20Hex%20%26%20Round.pdf?dl=0\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\" title=\"inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. I will always strive to cast items immediately and aim to get orders out the next day. \u003c\/p\u003e\n\u003cp\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out.  \u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"55mm \/ 3.2mm","offer_id":56627701514617,"sku":"DIS-HEX-B40-055-R3","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"55mm \/ 2.4mm","offer_id":56627701481849,"sku":"DIS-HEX-B40-055-R2","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"55mm \/ No Rod \/ No Drill hole","offer_id":56627701383545,"sku":"DIS-HEX-B40-055-NR","price":16.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ 3.2mm","offer_id":55271857226105,"sku":"DIS-HEX-B40-050-R3","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ 2.4mm","offer_id":55271857258873,"sku":"DIS-HEX-B40-050-R2","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ No Rod \/ No Drill hole","offer_id":55271857291641,"sku":"DIS-HEX-B40-050-NR","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ 3.2mm","offer_id":39907671179431,"sku":"DIS-HEX-B40-045-R3","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ 2.4mm","offer_id":40410549256359,"sku":"DIS-HEX-B40-045-R2","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ No Rod \/ No Drill hole","offer_id":40410559086759,"sku":"DIS-HEX-B40-045-NR","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ 3.2mm","offer_id":39907671212199,"sku":"DIS-HEX-B40-040-R3","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ 2.4mm","offer_id":40410553352359,"sku":"DIS-HEX-B40-040-R2","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ No Rod \/ No Drill hole","offer_id":40410559905959,"sku":"DIS-HEX-B40-040-NR","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ 3.2mm","offer_id":39907671244967,"sku":"DIS-HEX-B40-035-R3","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ 2.4mm","offer_id":40410557022375,"sku":"DIS-HEX-B40-035-R2","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ No Rod \/ No Drill hole","offer_id":40410560659623,"sku":"DIS-HEX-B40-035-NR","price":9.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/HexBust1.jpg?v=1620333855"},{"product_id":"hex-resin-display-plinths-50mm-tall","title":"Hex Resin Display Plinths - 50mm Tall","description":"\u003cp\u003eHex resin display plinths, cast in strong black pigmented resin. After casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/p\u003e\n\u003cp\u003eSome sizes have been designed hollow, this serves to reduce weight and aid shipping. A wide rim 10 - 15 mm rim has been left to allow somewhere to drill for transportation magnets (not supplied). Hollow plinths will be supplied with a sanded top surface finished to around 240 grit (some light scratches may remain). Hollow plinths are noted in the dropdown menu. \u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 100mm, 80mm, 60mm, 50mm, 45mm, 40mm and 35mm in profile. The finished height is approximately 50mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/p\u003e\n\u003cp\u003eA scaled printout of each plinth profile can be found \u003ca title=\"Hex plinth profile\" href=\"https:\/\/www.dropbox.com\/s\/boh1783aldatssj\/Hex%20Plinths.pdf?dl=0\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"100mm - Hollow","offer_id":39907751690407,"sku":"DIS-HEX-100-050","price":18.0,"currency_code":"GBP","in_stock":true},{"title":"80mm - Hollow","offer_id":39907751723175,"sku":"DIS-HEX-080-050","price":16.0,"currency_code":"GBP","in_stock":true},{"title":"60mm - Hollow","offer_id":39907751755943,"sku":"DIS-HEX-060-050","price":12.5,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":39907751788711,"sku":"DIS-HEX-050-050","price":10.5,"currency_code":"GBP","in_stock":true},{"title":"45mm","offer_id":39907763912871,"sku":"DIS-HEX-045-050","price":8.5,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":39907751821479,"sku":"DIS-HEX-040-050","price":7.0,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":39907751854247,"sku":"DIS-HEX-035-050","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/Hex3.jpg?v=1620335345"},{"product_id":"square-resin-display-plinths-45mm-tall","title":"Square Resin Display Plinths - 45mm Tall","description":"\u003cp\u003eSquare resin display plinths, cast in strong black pigmented resin. After casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/p\u003e\n\u003cp\u003eSome sizes have been designed hollow, this serves to reduce weight and aid shipping. A wide rim 10 - 15 mm rim has been left to allow somewhere to drill for transportation magnets (not supplied). \u003cspan\u003eHollow plinths will be supplied with a sanded top surface finished to around 240 grit (some light scratches may remain).\u003c\/span\u003e Hollow plinths are noted in the dropdown menu. \u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 150mm, 120mm, 100mm, 90mm, 80mm, 60mm, 50mm, 40mm and 35mm. The finished height is approximately 45mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"150mm - Hollow","offer_id":42249322365163,"sku":"DIS-SQU-150-045","price":34.0,"currency_code":"GBP","in_stock":true},{"title":"120mm - Hollow","offer_id":39907890954407,"sku":"DIS-SQU-120-045","price":26.0,"currency_code":"GBP","in_stock":true},{"title":"100mm - Hollow","offer_id":39907890823335,"sku":"DIS-SQU-100-045","price":22.0,"currency_code":"GBP","in_stock":true},{"title":"90mm - Hollow","offer_id":45485601194219,"sku":"DIS-SQU-090-045","price":18.0,"currency_code":"GBP","in_stock":true},{"title":"80mm - Hollow","offer_id":39907890856103,"sku":"DIS-SQU-080-045","price":16.0,"currency_code":"GBP","in_stock":true},{"title":"60mm - Hollow","offer_id":39907890888871,"sku":"DIS-SQU-060-045","price":13.0,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":39907890921639,"sku":"DIS-SQU-050-045","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":39907890987175,"sku":"DIS-SQU-080-040","price":7.0,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":39907891019943,"sku":"DIS-SQU-035-045","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/Square452.jpg?v=1620337066"},{"product_id":"square-resin-display-plinths-65mm-tall","title":"Square Resin Display Plinths - 65mm Tall","description":"\u003cp\u003eSquare resin display plinths, cast in strong black pigmented resin. After casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/p\u003e\n\u003cp\u003eSome sizes have been designed hollow, this serves to reduce weight and aid shipping. A wide rim 10 - 15 mm rim has been left to allow somewhere to drill for transportation magnets (not supplied). This hollow has been used by some to create water scenes and depth within their dioramas. Hollow plinths are noted in the dropdown menu. \u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 80mm, 60mm and 50mm. The finished height is approximately 65mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"80mm - Hollow","offer_id":39908045947047,"sku":"DIS-SQU-080-065","price":18.0,"currency_code":"GBP","in_stock":true},{"title":"60mm - Hollow","offer_id":39908045979815,"sku":"DIS-SQU-060-065","price":15.5,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":39908046012583,"sku":"DIS-SQU-050-065","price":12.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/Square652.jpg?v=1620337424"},{"product_id":"square-resin-display-plinths-55mm-tall","title":"Square Resin Display Plinths - 55mm Tall","description":"\u003cp\u003eSquare resin display plinths, cast in strong black pigmented resin. After casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 40mm and 35mm. The finished height is approximately 55mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"40mm","offer_id":39908090020007,"sku":"DIS-SQU-040-055","price":7.5,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":39908090052775,"sku":"DIS-SQU-035-055","price":6.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/Square551.jpg?v=1620337778"},{"product_id":"square-resin-display-plinths-35mm-tall","title":"Square Resin Display Plinths - 35mm Tall","description":"\u003cp\u003eSquare resin display plinths, cast in strong black pigmented resin. After casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 50mm, 40mm and 35mm. The finished height is approximately 35mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"50mm","offer_id":39908180689063,"sku":"DIS-SQU-050-035","price":7.0,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":39908180721831,"sku":"DIS-SQU-040-035","price":5.5,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":39908180754599,"sku":"DIS-SQU-035-035","price":4.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/Square352.jpg?v=1620338452"},{"product_id":"square-bust-resin-display-plinths","title":"Square Bust Resin Display Plinths - 40 degree slant","description":"\u003cp\u003eSquare bust resin display plinths, cast in black resin with a 40 degree slant. Plinths are supplied pre-drilled with a 40mm long metal rod in either 3.2mm or 2.4mm diameter. Also available without a rod and with no drilled hole, although a shallow 3mm pilot hole will remain (this is a cast in drilling guild)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter casting each plinth is machined sanded to ensure the bottom is parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 50mm, 45mm, 40mm and 35mm square. \u003cspan\u003eThe finished height is approximately 65mm to the highest point, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA scaled printout of each size can be found \u003ca href=\"https:\/\/www.dropbox.com\/s\/wjha904q8bktb89\/Square%20bust%20plinths.pdf?dl=0\" title=\"Square plinths tech drawing\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. I will always strive to cast items immediately and aim to get orders out the next day. \u003c\/p\u003e\n\u003cp\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out.  \u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"50mm \/ 3.2mm","offer_id":55271858143609,"sku":"DIS-SQU-B40-050-R3","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ 2.4mm","offer_id":55271858176377,"sku":"DIS-SQU-B40-050-R2","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ No Rod \/ No Drill hole","offer_id":55271858209145,"sku":"DIS-SQU-B40-050-NR","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ 3.2mm","offer_id":39908331815079,"sku":"DIS-SQU-B40-045-R3","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ 2.4mm","offer_id":40410577174695,"sku":"DIS-SQU-B40-045-R2","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ No Rod \/ No Drill hole","offer_id":40410580484263,"sku":"DIS-SQU-B40-045-NR","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ 3.2mm","offer_id":39908331847847,"sku":"DIS-SQU-B40-040-R3","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ 2.4mm","offer_id":40410578026663,"sku":"DIS-SQU-B40-040-R2","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ No Rod \/ No Drill hole","offer_id":40410581270695,"sku":"DIS-SQU-B40-040-NR","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ 3.2mm","offer_id":39908331880615,"sku":"DIS-SQU-B40-035-R3","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ 2.4mm","offer_id":40410579501223,"sku":"DIS-SQU-B40-035-R2","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ No Rod \/ No Drill hole","offer_id":40410583204007,"sku":"DIS-SQU-B40-035-NR","price":9.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/Squarebust40_4.jpg?v=1621170377"},{"product_id":"square-bust-resin-display-plinths-25-degree-slant","title":"Square Bust Resin Display Plinths - 25 degree slant","description":"\u003cp\u003eSquare bust resin display plinths, cast in black resin with a 25 degree slant. Plinths are supplied pre-drilled with a 40mm long metal rod in either 3.2mm or 2.4mm diameter. Also available without a rod and with no drilled hole, although a shallow 3mm pilot hole will remain (this is a cast in drilling guild)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter casting each plinth is machined sanded to ensure the bottom is parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 50mm, 45mm, 40mm and 35mm square. \u003cspan\u003eThe finished height is approximately 65mm to the highest point, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA scaled printout of each size can be found \u003ca title=\"square bust tech drawing\" href=\"https:\/\/www.dropbox.com\/s\/wjha904q8bktb89\/Square%20bust%20plinths.pdf?dl=0\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. I will always strive to cast items immediately and aim to get orders out the next day. \u003c\/p\u003e\n\u003cp\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out.  \u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"50mm \/ 3.2mm","offer_id":55271864893817,"sku":"DIS-SQU-B25-050-R3","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ 2.4mm","offer_id":55271864926585,"sku":"DIS-SQU-B25-050-R2","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ No Rod \/ No Drill hole","offer_id":55271864959353,"sku":"DIS-SQU-B25-050-NR","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ 3.2mm","offer_id":40029077078183,"sku":"DIS-SQU-B25-045-R3","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ 2.4mm","offer_id":40410566000807,"sku":"DIS-SQU-B25-045-R2","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ No Rod \/ No Drill hole","offer_id":40410567868583,"sku":"DIS-SQU-B25-045-NR","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ 3.2mm","offer_id":40029077110951,"sku":"DIS-SQU-B25-040-R3","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ 2.4mm","offer_id":40410566525095,"sku":"DIS-SQU-B25-040-R2","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ No Rod \/ No Drill hole","offer_id":40410568622247,"sku":"DIS-SQU-B25-040-NR","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ 3.2mm","offer_id":40029077143719,"sku":"DIS-SQU-B25-035-R3","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ 2.4mm","offer_id":40410567180455,"sku":"DIS-SQU-B25-035-R2","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ No Rod \/ No Drill hole","offer_id":40410569474215,"sku":"DIS-SQU-B25-035-NR","price":9.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/Squarebust25_4.jpg?v=1621170916"},{"product_id":"hex-bust-resin-display-plinths-25-degree-slant","title":"Hex Bust Resin Display Plinths - 25 degree slant","description":"\u003cp\u003eHex bust resin display plinths, cast in black resin \u003cspan\u003ewith a 25 degree slant\u003c\/span\u003e. Plinths are supplied pre-drilled with a 40mm long metal rod in either 3.2mm or 2.4mm diameter. Also available without a rod and with no drilled hole, although a shallow 3mm pilot hole will remain (this is a cast in drilling guild) \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter casting each plinth is machined sanded to ensure the bottom is parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 50mm, 45mm, 40mm and 35mm profile. \u003cspan\u003eThe finished height is approximately 65mm to the highest point, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA scaled printout of each size can be found \u003ca href=\"https:\/\/www.dropbox.com\/s\/kyfea0unszre0ge\/Bust%20Plinths%20-%20Hex%20%26%20Round.pdf?dl=0\" title=\"Bust plinth profiles\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. I will always strive to cast items immediately and aim to get orders out the next day. \u003c\/p\u003e\n\u003cp\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out.  \u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"50mm \/ 3.2mm","offer_id":55271872037241,"sku":"DIS-HEX-B25-050-R3","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ 2.4mm","offer_id":55271872070009,"sku":"DIS-HEX-B25-050-R2","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ No Rod \/ No Drill hole","offer_id":55271872102777,"sku":"DIS-HEX-B25-050-NR","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ 3.2mm","offer_id":42249486041323,"sku":"DIS-HEX-B25-045-R3","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ 2.4mm","offer_id":42249486139627,"sku":"DIS-HEX-B25-045-R2","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ No Rod \/ No Drill hole","offer_id":42249486237931,"sku":"DIS-HEX-B25-045-NR","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ 3.2mm","offer_id":42249486074091,"sku":"DIS-HEX-B25-040-R3","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ 2.4mm","offer_id":42249486172395,"sku":"DIS-HEX-B25-040-R2","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ No Rod \/ No Drill hole","offer_id":42249486270699,"sku":"DIS-HEX-B25-040-NR","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ 3.2mm","offer_id":42249486106859,"sku":"DIS-HEX-B25-035-R3","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ 2.4mm","offer_id":42249486205163,"sku":"DIS-HEX-B25-035-R2","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ No Rod \/ No Drill hole","offer_id":42249486303467,"sku":"DIS-HEX-B25-035-NR","price":9.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/HexBust25degree6.jpg?v=1640638406"},{"product_id":"round-bust-resin-display-plinths-25-degree-slant","title":"Round Bust Resin Display Plinths - 25 degree slant","description":"\u003cp\u003eRound Bust resin display plinths, cast in black resin \u003cspan\u003ewith a \u003c\/span\u003e\u003cspan\u003e25\u003c\/span\u003e\u003cspan\u003e degree slant\u003c\/span\u003e. Plinths are supplied pre-drilled with a 40mm long metal rod in either 3.2mm or 2.4mm diameter. Also available without a rod and with no drilled hole, although a shallow 3mm pilot hole will remain (this is a cast in drilling guild)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter casting each plinth is machined sanded to ensure the bottom is parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 50mm, 45mm, 40mm and 35mm in diameter. \u003cspan\u003eThe finished height is approximately 65mm to the highest point, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA scaled printout of each size can be found \u003ca href=\"https:\/\/www.dropbox.com\/s\/kyfea0unszre0ge\/Bust%20Plinths%20-%20Hex%20%26%20Round.pdf?dl=0\" title=\"Bust plinth profiles\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. I will always strive to cast items immediately and aim to get orders out the next day. \u003c\/p\u003e\n\u003cp\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out.  \u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"50mm \/ 3.2mm","offer_id":55271877706105,"sku":"DIS-RND-B25-050-R3","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ 2.4mm","offer_id":55271877738873,"sku":"DIS-RND-B25-050-R2","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ No Rod \/ No Drill hole","offer_id":55271877771641,"sku":"DIS-RND-B25-050-NR","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ 3.2mm","offer_id":42249558425835,"sku":"DIS-RND-B25-045-R3","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ 2.4mm","offer_id":42249558524139,"sku":"DIS-RND-B25-045-R2","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ No Rod \/ No Drill hole","offer_id":42249558622443,"sku":"DIS-RND-B25-045-NR","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ 3.2mm","offer_id":42249558458603,"sku":"DIS-RND-B25-040-R3","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ 2.4mm","offer_id":42249558556907,"sku":"DIS-RND-B25-040-R2","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ No Rod \/ No Drill hole","offer_id":42249558655211,"sku":"DIS-RND-B25-040-NR","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ 3.2mm","offer_id":42249558491371,"sku":"DIS-RND-B25-035-R3","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ 2.4mm","offer_id":42249558589675,"sku":"DIS-RND-B25-035-R2","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ No Rod \/ No Drill hole","offer_id":42249558687979,"sku":"DIS-RND-B25-035-NR","price":9.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/RoundBust25degrees6.jpg?v=1640639224"},{"product_id":"tapered-square-resin-display-plinths","title":"Tapered Square Resin Display Plinths","description":"\u003cp\u003eTapered square resin display plinths, cast in black resin. \u003cspan\u003eAfter casting each plinth is machined sanded to ensure the bottom is parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlinths are supplied pre-drilled with a 40mm long metal rod in either 3.2mm or 2.4mm diameter. Also available without a rod and with no drilled hole, although a shallow 2mm pilot hole will remain (this is a cast in drilling guild)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe finished height can vary plinth to plinth but I always aim to match finished heights across similar plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThere are 3 sizes to choose from and a scaled printout of each size can be found \u003ca href=\"https:\/\/www.dropbox.com\/s\/4s8cjj2ye1dprcn\/Tarpered%20Square.pdf?dl=0\" title=\"Tapered square tech drawing\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. I will always strive to cast items immediately and aim to get orders out the next day. \u003c\/p\u003e\n\u003cp\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out.  \u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"Large \/ 3.2mm","offer_id":42252175835371,"sku":"DIS-SQU-TPR-LRG-R3","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"Medium \/ 3.2mm","offer_id":42252175868139,"sku":"DIS-SQU-TPR-MED-R3","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"Small \/ 3.2mm","offer_id":42252175900907,"sku":"DIS-SQU-TPR-SML-R3","price":8.0,"currency_code":"GBP","in_stock":true},{"title":"Large \/ 2.4mm","offer_id":42252175933675,"sku":"DIS-SQU-TPR-LRG-R2","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"Medium \/ 2.4mm","offer_id":42252175966443,"sku":"DIS-SQU-TPR-MED-R2","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"Small \/ 2.4mm","offer_id":42252175999211,"sku":"DIS-SQU-TPR-SML-R2","price":8.0,"currency_code":"GBP","in_stock":true},{"title":"Large \/ No Rod \/ No Drill hole","offer_id":42252176031979,"sku":"DIS-SQU-TPR-LRG-NR","price":13.0,"currency_code":"GBP","in_stock":true},{"title":"Medium \/ No Rod \/ No Drill hole","offer_id":42252176064747,"sku":"DIS-SQU-TPR-MED-NR","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"Small \/ No Rod \/ No Drill hole","offer_id":42252176097515,"sku":"DIS-SQU-TPR-SML-NR","price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/Tapered1.jpg?v=1640685844"},{"product_id":"rectangular-resin-display-plinths-35mm-tall","title":"Rectangular Resin Display Plinths - 35mm Tall","description":"\u003cp\u003eRectangular resin display plinths, cast in strong black pigmented resin. These are the ideal plinth for large dioramas, squads, vehicles and more. Sizes currently in production are 120 x 225mm, 145 x 200mm, 100 x 200mm, 65 x 160mm, 60 x 200mm, 60 x 250mm and 60 x 95mm. \u003c\/p\u003e\n\u003cp\u003eEach plinth has been created hollow, this serves to reduce weight, aid shipping and allow a range of modelling opportunities. A wide rim 10 - 15 mm rim has been left to allow somewhere to drill for transportation magnets (not supplied). \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. The finished height is approximately 35mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"145mm x 200mm - hollow","offer_id":42814385619179,"sku":"DIS-REC-145-200-035","price":36.0,"currency_code":"GBP","in_stock":true},{"title":"120mm x 225mm - hollow","offer_id":42252240814315,"sku":"DIS-REC-120-225-035","price":30.0,"currency_code":"GBP","in_stock":true},{"title":"100mm x 200mm - hollow","offer_id":42252240879851,"sku":"DIS-REC-100-200-035","price":24.0,"currency_code":"GBP","in_stock":true},{"title":"65mm x 160mm - hollow","offer_id":42252240912619,"sku":"DIS-REC-065-160-035","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"60mm x 95mm - hollow","offer_id":42252240945387,"sku":"DIS-REC-060-095-035","price":16.0,"currency_code":"GBP","in_stock":true},{"title":"60mm x 200mm - hollow","offer_id":42555225735403,"sku":"DIS-REC-060-200-035","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"60mm x 250mm - hollow","offer_id":42404299145451,"sku":"DIS-REC-060-250-035","price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/Rectangule2.jpg?v=1640686848"},{"product_id":"sloped-oval-resin-display-plinths","title":"Sloped Oval Resin Display Plinths","description":"\u003cp\u003eSloped Oval resin display plinths,\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecast in strong black pigmented resin. Sizes I am currently producing are based off of the popular oval sizes used in tabletop gaming figures. The angles of each slope varies, you can find printable diagrams with more information \u003ca href=\"https:\/\/www.dropbox.com\/s\/qegl0lbie4inwp5\/Sloped%20Ovals.pdf?dl=0\" title=\"Sloped Oval Plinth Sizes\"\u003eHERE\u003c\/a\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAfter casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. The finished height to the top of the slant is approximately 40mm once machined, each plinth can vary due to design.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast \u003c\/span\u003e\u003cspan\u003eitems\u003c\/span\u003e\u003cspan\u003e immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid, and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"170mm x 110mm","offer_id":42814406820075,"sku":"DIS-OVL-170-110-SLOP","price":22.0,"currency_code":"GBP","in_stock":true},{"title":"150mm x 95mm","offer_id":42814406852843,"sku":"DIS-OVL-150-095-SLOP","price":19.0,"currency_code":"GBP","in_stock":true},{"title":"120mm x 92mm","offer_id":42814406885611,"sku":"DIS-OVL-120-092-SLOP","price":17.5,"currency_code":"GBP","in_stock":true},{"title":"105mm x 70mm","offer_id":42814406918379,"sku":"DIS-OVL-105-070-SLOP","price":13.0,"currency_code":"GBP","in_stock":true},{"title":"90mm x 52mm","offer_id":42814406951147,"sku":"DIS-OVL-090-052-SLOP","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"75mm x 44mm","offer_id":42814406983915,"sku":"DIS-OVL-075-044-SLOP","price":8.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/SlopedOval1.jpg?v=1652265873"},{"product_id":"backdrop-resin-display-plinths-various","title":"Backdrop Resin Display Plinths - Various","description":"\u003cp\u003eThese all new backdrop resin display plinths are the first in a whole new range. Designed to give you far more options when creating displays as well as making modelling interesting dioramas easier. Currently we have four variants to choose from - Steps, Two Step, Wavy and Quarter Pipe. Each is based off the larger 75mm backdrop plinths and you can find helpful scaled printouts \u003ca href=\"https:\/\/www.dropbox.com\/s\/knv5mqm1glzu728\/Steps%20Swoop%20and%20Wave%20Backdrop.pdf?dl=0\" title=\"backdrop plinth printout various\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eEach plinth has been cast in a durable black resin and has been machine sanded on the rear face to ensure a true backdrop. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"Steps","offer_id":42814431527147,"sku":"DIS-BKD-STP-075","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"Two Step","offer_id":42814431559915,"sku":"DIS-BKD-2STP-075","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"Wavy","offer_id":42814431592683,"sku":"DIS-BKD-WVY-075","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"Quarter Pipe","offer_id":42814431625451,"sku":"DIS-BKD-QPIP-075","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/Newbackdrops2.jpg?v=1652268331"},{"product_id":"backdrop-resin-display-plinths-half-pipe","title":"Backdrop Resin Display Plinths - Half Pipe","description":"\u003cp\u003e\u003cspan\u003eAnother backdrop plinth design has joined the range... in fact two. These half pipe backdrops give you\u003c\/span\u003e\u003cspan\u003e a huge wrap around canvas to work with when\u003c\/span\u003e\u003cspan\u003e creating displays as well as modelling dioramas. \u003c\/span\u003e\u003cspan\u003eThere are two widths available, 75mm and 120mm \u003c\/span\u003e\u003cspan\u003eand you can find helpful scaled printouts \u003c\/span\u003e\u003ca title=\"backdrop plinth printout half pipe\" href=\"https:\/\/www.dropbox.com\/s\/3on03hj1qguxzp3\/Half%20Pipe%20Backdrop.pdf?dl=0\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach plinth has been cast in a durable black resin and has been machine sanded on the rear face to ensure a true backdrop. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"Half Pipe 75mm Wide","offer_id":42875510358251,"sku":"DIS-BKD-HLF-075","price":28.0,"currency_code":"GBP","in_stock":true},{"title":"Half Pipe 120mm Wide","offer_id":42875510391019,"sku":"DIS-BKD-HLF-120","price":34.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/HalfPipe4.jpg?v=1653594736"},{"product_id":"oval-resin-display-plinths-20mm-tall","title":"Oval Resin Display Plinths - 20mm tall","description":"\u003cp\u003e20mm high Oval resin display plinths,\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecast in strong black pigmented resin. Sizes currently produced are based off of the popular oval sizes used in tabletop gaming figures. You can find printable diagrams of each oval size \u003ca href=\"https:\/\/www.dropbox.com\/s\/ttf5l26bz6erwl3\/Oval%20Sizes.pdf?dl=0\" title=\"Oval Plinth Sizes\"\u003eHERE\u003c\/a\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. The finished height is approximately 20mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\" title=\"inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be \u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of \u003cstrong\u003eup to a week\u003c\/strong\u003e \u003cspan\u003eprior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast \u003c\/span\u003e\u003cspan\u003eitems\u003c\/span\u003e\u003cspan\u003e immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid, and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"195mm x 150mm","offer_id":44490897424619,"sku":"DIS-OVL-195-150-020","price":23.5,"currency_code":"GBP","in_stock":true},{"title":"170mm x 135mm","offer_id":44490896965867,"sku":"DIS-OVL-170-135-020","price":20.5,"currency_code":"GBP","in_stock":true},{"title":"170mm x 110mm","offer_id":43282291720427,"sku":"DIS-OVL-170-110-020","price":18.5,"currency_code":"GBP","in_stock":true},{"title":"150mm x 95mm","offer_id":43282291753195,"sku":"DIS-OVL-150-095-020","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"120mm x 92mm","offer_id":43282291785963,"sku":"DIS-OVL-120-092-020","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"105mm x 70mm","offer_id":43282291818731,"sku":"DIS-OVL-105-070-020","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"90mm x 52mm","offer_id":43282291851499,"sku":"DIS-OVL-090-052-020","price":8.0,"currency_code":"GBP","in_stock":true},{"title":"75mm x 44mm","offer_id":43282291884267,"sku":"DIS-OVL-075-044-020","price":5.75,"currency_code":"GBP","in_stock":true},{"title":"60mm x 35mm","offer_id":43282291917035,"sku":"DIS-OVL-060-035-020","price":4.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/20mmOvals1.jpg?v=1661979546"},{"product_id":"round-resin-display-plinths-20mm-tall","title":"Round Resin Display Plinths - 20mm tall","description":"\u003cp\u003e20mm tall round black resin display plinths, cast in strong black resin. \u003cspan\u003eAfter casting each plinth is machined sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 160mm, 130mm, 100mm, 90mm, 80mm, \u003cspan\u003e70mm, 65mm,\u003c\/span\u003e 60mm, 55mm, 50mm, 45mm, 40mm, 35mm, 30mm and 20mm in diameter. \u003cspan\u003eThe finished height is approximately 20mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. I will always strive to cast items immediately and aim to get orders out the next day. \u003c\/p\u003e\n\u003cp\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out.  \u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"160mm","offer_id":43282311643371,"sku":"DIS-RND-160-020","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"130mm","offer_id":43282311676139,"sku":"DIS-RND-130-020","price":18.0,"currency_code":"GBP","in_stock":true},{"title":"100mm","offer_id":43282311708907,"sku":"DIS-RND-100-020","price":14.5,"currency_code":"GBP","in_stock":true},{"title":"90mm","offer_id":43891133513963,"sku":"DIS-RND-090-020","price":12.5,"currency_code":"GBP","in_stock":true},{"title":"80mm","offer_id":43282311741675,"sku":"DIS-RND-080-020","price":10.5,"currency_code":"GBP","in_stock":true},{"title":"70mm","offer_id":43424788578539,"sku":"DIS-RND-070-020","price":9.5,"currency_code":"GBP","in_stock":true},{"title":"65mm - Fits 60mm Base","offer_id":43424788611307,"sku":"DIS-RND-065-020","price":8.5,"currency_code":"GBP","in_stock":true},{"title":"60mm","offer_id":43282311807211,"sku":"DIS-RND-060-020","price":8.25,"currency_code":"GBP","in_stock":true},{"title":"55mm","offer_id":43891133546731,"sku":"DIS-RND-055-020","price":7.0,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":43282311839979,"sku":"DIS-RND-050-020","price":6.0,"currency_code":"GBP","in_stock":true},{"title":"45mm","offer_id":43891133612267,"sku":"DIS-RND-045-020","price":5.5,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":43282311872747,"sku":"DIS-RND-040-020","price":4.5,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":43282311905515,"sku":"DIS-RND-035-020","price":4.0,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":45485606535403,"sku":"DIS-RND-030-020","price":3.85,"currency_code":"GBP","in_stock":true},{"title":"20mm","offer_id":45485606699243,"sku":"DIS-RND-020-020","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/20mmRound1.jpg?v=1661981600"},{"product_id":"rounded-rectangular-squad-plinths-35mm-tall","title":"Rounded Rectangle Squad Plinths - 35mm Tall","description":"\u003cp\u003eRounded rectangle resin display plinths, cast in strong black pigmented resin. These have been specifically designed with squads in mind. There are 3 widths available (50mm, 60mm and 70mm) along with 3 lengths in each (150mm, 200mm and 250mm) This should accommodate groups of models of all sizes.  \u003c\/p\u003e\n\u003cp\u003eEach plinth has been created hollow, this serves to reduce weight, aid shipping and allow a range of modelling opportunities. A wide rim 10 - 15 mm rim has been left to allow somewhere to drill for transportation magnets (not supplied). \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. The finished height is approximately 35mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"70mm x 250mm -Hollow","offer_id":43906567176427,"sku":"DIS-RND-REC-070-250","price":27.0,"currency_code":"GBP","in_stock":true},{"title":"70mm x 200mm - Hollow","offer_id":43906567209195,"sku":"DIS-RND-REC-070-200","price":23.0,"currency_code":"GBP","in_stock":true},{"title":"70mm x 150mm - Hollow","offer_id":43906567241963,"sku":"DIS-RND-REC-070-150","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"60mm x 250mm - Hollow","offer_id":43906567274731,"sku":"DIS-RND-REC-060-250","price":24.0,"currency_code":"GBP","in_stock":true},{"title":"60mm x 200mm - Hollow","offer_id":43906567307499,"sku":"DIS-RND-REC-060-200","price":21.0,"currency_code":"GBP","in_stock":true},{"title":"60mm x 150mm - Hollow","offer_id":43906567340267,"sku":"DIS-RND-REC-060-150","price":18.0,"currency_code":"GBP","in_stock":true},{"title":"50mm x 250mm - Hollow","offer_id":43906567373035,"sku":"DIS-RND-REC-050-250","price":22.0,"currency_code":"GBP","in_stock":true},{"title":"50mm x 200mm - Hollow","offer_id":43906570420459,"sku":"DIS-RND-REC-050-200","price":19.0,"currency_code":"GBP","in_stock":true},{"title":"50mm x 150mm - Hollow","offer_id":43906570453227,"sku":"DIS-RND-REC-050-150","price":16.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/products\/RoundedSquad3.jpg?v=1681655434"},{"product_id":"backdrop-resin-display-plinths-flat","title":"Backdrop Resin Display Plinths - Flat","description":"\u003cp\u003eThis entirely new range of backdrop plinths is our most comprehensive yet, with six to choose from. As popular as our existing backdrops are these have a completely flat platform, allowing for ease of modelling right up to the backboard. Also extending the heights of the backboards, allowing you to cut them down to suit. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWith eight in the range all needs should be covered. The extra small measure 30mm and 25mm wide and 35mm deep, these have 80mm backboards. Small measure 40 and 45mm wide and 40mm deep with a 95mm high backboard. The smaller of the mediums is 50mm wide, 45mm deep with a 100mm board. Then we have a 60mm wide, 55mm deep and 120mm backboard \u003c\/p\u003e\n\u003cp\u003eOur Largest are 70mm wide, 65mm with and 140mm board, the the largest of the two 80mm wide, 75mm deep with a 160mm backboard\u003c\/p\u003e\n\u003cp\u003eEvery plinth is cast in a durable black resin and has been machine sanded on the rear face to ensure a true backdrop. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. \u003c\/p\u003e\n\u003cp\u003eFind a helpful scaled printout of each profile \u003ca title=\"flat backdrop plans\" href=\"https:\/\/www.dropbox.com\/scl\/fo\/r1l3jpxbgp1yc0bzo4rn4\/h?dl=0\u0026amp;rlkey=5hwstpkhjgwp03ay99j08yuxe\"\u003eHERE \u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"Large 80mm Wide","offer_id":43991086596331,"sku":"DIS-BKD-LRG-080","price":30.0,"currency_code":"GBP","in_stock":true},{"title":"Large 70mm Wide","offer_id":43991115301099,"sku":"DIS-BKD-LRG-070","price":26.0,"currency_code":"GBP","in_stock":true},{"title":"Medium 60mm Wide","offer_id":43991086563563,"sku":"DIS-BKD-MED-060","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"Medium 50mm Wide","offer_id":43991086530795,"sku":"DIS-BKD-MED-050","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"Small 45mm Wide","offer_id":43991086498027,"sku":"DIS-BKD-SML-045","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Small 40mm Wide","offer_id":43991086465259,"sku":"DIS-BKD-SML-040","price":13.0,"currency_code":"GBP","in_stock":true},{"title":"Extra Small 35mm Wide","offer_id":55271846838649,"sku":"DIS-BKD-XS-035","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"Extra Small 30mm Wide","offer_id":55271847297401,"sku":"DIS-BKD-XS-030","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/files\/NewBackdrops2_82015fa2-ab68-4e17-9772-8bca6ec1bcd1.jpg?v=1686303381"},{"product_id":"plinth-inserts","title":"Plinth Inserts","description":"\u003cp\u003eWe offer the option to purchase pre-inserted magnets or screw inserts. We use N52 high grade neodymium magnets and M4 screw inserts. These are pressure fitted into the underside of your chosen plinth prior to shipping. We will insert a suitable amount of magnets for each plinth ranging from 2-4 and test the hold on a metal surface. One Screw insert will be supplied central to the plinth where possible, hollow plinths will have two inserted at equidistant points. All screw inserts supplied with 14mm Flanged button screws and a hex key .\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAlthough we are confident inserts will not pull out under normal loads, extreme loads may dislodge them. We do not guarantee the safety of your miniatures during transport and always recommend using a secondary (backup) fixing method. We recommend using magnet board for maximum attraction, such as this product from \u003ca title=\"magnet board\" href=\"https:\/\/www.themetalstore.co.uk\/products\/stainless-steel-magnetic-boards\"\u003eThe Metal Store.\u003c\/a\u003e Screw fixings are designed to be fixed through a shelf of metal, plastic or wood within your case. Screws can work loose over time due to vibration hence why a secondary fixing method is recommended.\u003c\/p\u003e\n\u003cp\u003eEach purchase is for one set of inserts (either screw or magnet) for one plinth. If you have multiple plinths you require these for, then a number equal to the number of plinths should be ordered. Please note in the comments section of your basket any special requirements for which inserts for which plinths etc.\u003c\/p\u003e\n\u003ch3\u003eCAN I HAVE BOTH SCREW AND MAGNETS IN ONE PLINTH?\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eYes you can and it is one way of ensuring the safe transport of your plinth. Please purchase one of each insert option and add a note to your order saying this is what you require. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eWHY IS IT ONE PRICE REGARDLESS OF PLINTH?\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eAs there are so many different sizes of plinth in the store which all require a varied number of magnets (you'll always get two screw inserts) we have simply evened out the cost for ease. The process is still the same regardless and we hope we have accounted for this accordingly. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eADD ON ITEM ONLY!\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThese inserts are an add-on only item and must be purchased with a plinth. If you forget to add these to an order please get in touch and we can make that amendment our end. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"Screw Insert for One Plinth","offer_id":44228034330859,"sku":"SCREW-INSERT","price":3.5,"currency_code":"GBP","in_stock":true},{"title":"Magnet Insert for One Plinth","offer_id":44228034363627,"sku":"MAGNET-INSERT","price":3.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/files\/Insert1.jpg?v=1697812581"},{"product_id":"copy-of-hex-bust-resin-display-plinths-25-degree-slant","title":"Round Trumpet Resin Display Plinths","description":"\u003cp\u003eRound display plinths, cast in black resin featuring a trumpet style top. Plinths can be supplied pre-drilled with a 40mm long metal rod with a 2.4mm diameter. Also available without a rod and with no drilled hole, although a shallow 3mm pilot hole will remain (this is a cast in drilling guild) \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter casting each plinth is machined sanded to ensure the bottom is parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are\u003cspan\u003e \u003c\/span\u003e35mm, 40mm,\u003cspan\u003e \u003c\/span\u003e45mm and 50mm profile.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eThe finished height are approximately 65mm, 70mm, 75mm and 90mm accordingly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA scaled printout of each size can be found \u003ca href=\"https:\/\/www.dropbox.com\/scl\/fi\/1aoa0bc1m8fbjl6i6hhf8\/Trumpet-Bust.pdf?rlkey=9p5qnbf64oqsreozcvpff55md\u0026amp;dl=0\" title=\"Bust plinth profiles\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\" title=\"inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. I will always strive to cast items immediately and aim to get orders out the next day. \u003c\/p\u003e\n\u003cp\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out.  \u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"50mm \/ 2.4mm","offer_id":45485602341099,"sku":"DIS-TRUM-RND-050-R2","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"50mm \/ No Rod \/ No Drill hole","offer_id":45485602373867,"sku":"DIS-TRUM-RND-050-NR","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ 2.4mm","offer_id":44490923540715,"sku":"DIS-TRUM-RND-045-R2","price":13.0,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ No Rod \/ No Drill hole","offer_id":44490923639019,"sku":"DIS-TRUM-RND-045-NR","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ 2.4mm","offer_id":44490923573483,"sku":"DIS-TRUM-RND-040-R2","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"40mm \/ No Rod \/ No Drill hole","offer_id":44490923671787,"sku":"DIS-TRUM-RND-040-NR","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ 2.4mm","offer_id":44490923606251,"sku":"DIS-TRUM-RND-035-R2","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"35mm \/ No Rod \/ No Drill hole","offer_id":44490923704555,"sku":"DIS-TRUM-RND-035-NR","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/files\/Trumpet6.jpg?v=1704901946"},{"product_id":"rounded-square-resin-display-plinths-35mm-tall","title":"Rounded Square Resin Display Plinths - 35mm Tall","description":"\u003cp\u003eAs featured in the Artis Opus Kickstarter! Rounded Square resin display plinths, cast in strong black pigmented resin. After casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/p\u003e\n\u003cp\u003eSome sizes have been designed hollow, this serves to reduce weight and aid shipping. A wide rim 10 - 15 mm rim has been left to allow somewhere to drill for transportation magnets (not supplied). \u003cspan\u003eHollow plinths will be supplied with a sanded top surface finished to around 240 grit (some light scratches may remain).\u003c\/span\u003e Hollow plinths are noted in the dropdown menu. \u003c\/p\u003e\n\u003cp\u003eSizes I am currently producing are 80mm, 60mm, 50mm and 40mm. The finished height is approximately 35mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"80mm - Hollow","offer_id":44490937729259,"sku":"DIS-RND-SQU-080","price":13.0,"currency_code":"GBP","in_stock":true},{"title":"60mm - Hollow","offer_id":44490937762027,"sku":"DIS-RND-SQU-060","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":44490937794795,"sku":"DIS-RND-SQU-050","price":8.0,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":44490937827563,"sku":"DIS-RND-SQU-040","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/files\/RoundedSquare5.jpg?v=1704904030"},{"product_id":"self-adhesive-velvet-for-plinths","title":"Self Adhesive Velvet for Plinths - Black","description":"\u003cp\u003eThis self adhesive velvet is my own go to way to add that finishing touch to every plinth. Having used many different products over the years, I have found this by far the easiest to use and most forgiving trophy baize on the market. Not only does it look fantastic, it actually helps protect those delicate models by absorbing impact, adding friction and cushioning to stop vibration or movement. It also just feels amazing when handling the plinth.\u003c\/p\u003e\n\u003cp\u003eSupplied in a 165mm x 450mm roll, which will cover up to the largest plinth available in store, and more! One roll will last multiple projects. Unlike other trophy Baize this product does not stretch or distort when applying, it cuts to shape easily and is applied like a sticker.\u003c\/p\u003e\n\u003ch3\u003eHOW DO I APPLY IT?\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThis is the easy (and fun bit) simply flip the velvet over to the paper side, roll the sheet back on itself to flatten. Draw around your plinth then mark a few millimetres smaller, and cut out with scissors or a knife. If you have a circle cutter then its even easier for those round plinths. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce cut simply peel off like a sticker and apply to the underside of your plinth. Its repositionable so if you place it wrong, carefully unpeel and reapply (obviously it will loose stick if handled to many times) Once applied press to ensure a good bond. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCan be applied over an open (hollow) bottom plinths but product may distort over time where unsupported. In this instance strips can be applied around the outside or the inner material cut away and reused for another project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eWHAT ABOUT MAGNETS AND SCREWS?\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eHopefully it goes without saying that magnets and screw inserts should be in place before applying. The high grade N52 magnets we supply will work through this absolutely fine. If you are a fan of screw inserts, carefully cut around them once applied to reveal the insert\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"Default Title","offer_id":45844033405163,"sku":"VELVET-165-450-BLK","price":3.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/files\/20240926_111114.jpg?v=1727348524"},{"product_id":"round-resin-display-plinths-45mm-tall","title":"Round Resin Display Plinths - 45mm Tall","description":"\u003cp\u003e45mm tall round resin display plinths, cast in strong black pigmented resin. After casting each plinth is machined sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/p\u003e\n\u003cp\u003eSome sizes have been designed hollow, this serves to reduce weight and aid shipping. A wide rim 10 - 15 mm rim has been left to allow somewhere to drill for transportation magnets (not supplied). \u003cspan\u003eHollow plinths will be supplied with a sanded top surface finished to around 240 grit (some light scratches may remain).\u003c\/span\u003e Hollow plinths are noted in the dropdown menu. \u003c\/p\u003e\n\u003cp\u003eSizes available are 160mm, 130mm, 120mm, 110mm, 100mm, 90mm 80mm, 70mm, 65mm, 60mm, 55mm, 50mm, 45mm , 40mm, 35mm, 30mm, 25mm and 20mm in diameter. The finished height is approximately 45mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"inserts\" href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"160mm - Hollow","offer_id":54827584749945,"sku":"DIS-RND-160-045","price":32.0,"currency_code":"GBP","in_stock":true},{"title":"130mm - Hollow","offer_id":54827584782713,"sku":"DIS-RND-130-045","price":27.0,"currency_code":"GBP","in_stock":true},{"title":"120mm - Hollow","offer_id":55175240483193,"sku":"DIS-RND-120-045","price":24.0,"currency_code":"GBP","in_stock":true},{"title":"110mm - Hollow","offer_id":54827584815481,"sku":"DIS-RND-110-045","price":22.0,"currency_code":"GBP","in_stock":true},{"title":"100mm - Hollow","offer_id":54827584848249,"sku":"DIS-RND-100-045","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"90mm - Hollow","offer_id":54827584881017,"sku":"DIS-RND-090-045","price":18.0,"currency_code":"GBP","in_stock":true},{"title":"80mm - Hollow","offer_id":54827584913785,"sku":"DIS-RND-080-045","price":16.5,"currency_code":"GBP","in_stock":true},{"title":"70mm - Hollow","offer_id":54827584946553,"sku":"DIS-RND-070-045","price":15.5,"currency_code":"GBP","in_stock":true},{"title":"65mm - Hollow (Fits 60mm Base)","offer_id":54827584979321,"sku":"DIS-RND-065-045","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"60mm - Hollow","offer_id":54827585012089,"sku":"DIS-RND-060-045","price":13.0,"currency_code":"GBP","in_stock":true},{"title":"55mm - Hollow","offer_id":54827585044857,"sku":"DIS-RND-055-045","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":54827585077625,"sku":"DIS-RND-050-045","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"45mm","offer_id":54827585110393,"sku":"DIS-RND-045-045","price":9.5,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":54827585143161,"sku":"DIS-RND-040-045","price":7.5,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":54827585175929,"sku":"DIS-RND-035-045","price":5.25,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54827585208697,"sku":"DIS-RND-030-045","price":4.75,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":55175240876409,"sku":"DIS-RND-025-045","price":4.0,"currency_code":"GBP","in_stock":true},{"title":"20mm","offer_id":55175241105785,"sku":"DIS-RND-020-045","price":3.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/files\/20250528_160404_4b2514d0-57af-475b-a8a9-b3e5cf13edb9.jpg?v=1748450358"},{"product_id":"round-resin-display-plinths-45mm-tall-base-insert","title":"Round Resin Base Insert Display Plinths - 45mm Tall","description":"\u003cp\u003eThese Round 45mm tall plinths allow for miniatures to remain on their gaming bases and be seamlessly displayed for competition. These designs have a sunken recess for each of the common base sizes. Once inserted your models base will sit flush with a rim of black resin.\u003c\/p\u003e\n\u003cp\u003eWe produce plinths for the following round base sizes - 100mm, 90mm, 80mm, 60mm (base measures 65mm), 50mm, 40mm, 32mm, 28mm and 25mm. Each plinth has a 2.5mm rim so will be around 5mm large in diameter than each base. Some sizes have been designed hollow, this serves to reduce weight and aid shipping. Bases will span this hollow section when inserted, hollow plinths are noted in the drop down menu. We recommend using sticky tac or putty to temporally hold your model in place.\u003c\/p\u003e\n\u003cp\u003ePlastic bases can vary in size by a few millimetres depending on manufacturer, we check each casting popular production bases when cast. Paint build up on base rim will affect the fit, and may require you to adjust the rim by sanding the leading edge. Bases not included\u003c\/p\u003e\n\u003cp\u003eThe finished height is approximately 45mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. Cast in strong black pigmented resin. After casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\" title=\"inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"100mm Base - Hollow","offer_id":54827605393785,"sku":"DIS-RND-100-BASE-INSERT","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"90mm Base - Hollow","offer_id":54827605426553,"sku":"DIS-RND-090-BASE-INSERT","price":19.0,"currency_code":"GBP","in_stock":true},{"title":"80mm Base - Hollow","offer_id":54827605459321,"sku":"DIS-RND-080-BASE-INSERT","price":18.0,"currency_code":"GBP","in_stock":true},{"title":"65mm ('60mm' Base) - Hollow","offer_id":54827605524857,"sku":"DIS-RND-065-BASE-INSERT","price":16.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Base - Hollow","offer_id":54827605623161,"sku":"DIS-RND-050-BASE-INSERT","price":13.0,"currency_code":"GBP","in_stock":true},{"title":"40mm Base","offer_id":54827605688697,"sku":"DIS-RND-040-BASE-INSERT","price":9.0,"currency_code":"GBP","in_stock":true},{"title":"32mm Base","offer_id":54827605721465,"sku":"DIS-RND-032-BASE-INSERT","price":7.0,"currency_code":"GBP","in_stock":true},{"title":"28mm Base","offer_id":54827605754233,"sku":"DIS-RND-028-BASE-INSERT","price":6.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Base","offer_id":54827669979513,"sku":"DIS-RND-025-BASE-INSERT","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/files\/20250528_162124.jpg?v=1748452245"},{"product_id":"self-adhesive-velvet-for-plinths-black-copy","title":"Self Adhesive Velvet for Plinths - Red","description":"\u003cp\u003eThis self adhesive velvet is my own go to way to add that finishing touch to every plinth. Having used many different products over the years, I have found this by far the easiest to use and most forgiving trophy baize on the market. Not only does it look fantastic, it actually helps protect those delicate models by absorbing impact, adding friction and cushioning to stop vibration or movement. It also just feels amazing when handling the plinth.\u003c\/p\u003e\n\u003cp\u003eSupplied in a 165mm x 450mm roll, which will cover up to the largest plinth available in store, and more! One roll will last multiple projects. Unlike other trophy Baize this product does not stretch or distort when applying, it cuts to shape easily and is applied like a sticker.\u003c\/p\u003e\n\u003ch3\u003eHOW DO I APPLY IT?\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThis is the easy (and fun bit) simply flip the velvet over to the paper side, roll the sheet back on itself to flatten. Draw around your plinth then mark a few millimetres smaller, and cut out with scissors or a knife. If you have a circle cutter then its even easier for those round plinths. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce cut simply peel off like a sticker and apply to the underside of your plinth. Its repositionable so if you place it wrong, carefully unpeel and reapply (obviously it will loose stick if handled to many times) Once applied press to ensure a good bond. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCan be applied over an open (hollow) bottom plinths but product may distort over time where unsupported. In this instance strips can be applied around the outside or the inner material cut away and reused for another project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eWHAT ABOUT MAGNETS AND SCREWS?\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eHopefully it goes without saying that magnets and screw inserts should be in place before applying. The high grade N52 magnets we supply will work through this absolutely fine. If you are a fan of screw inserts, carefully cut around them once applied to reveal the insert\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"Default Title","offer_id":55486047584633,"sku":"VELVET-165-450-RED","price":3.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/files\/20250718_122927.jpg?v=1752842199"},{"product_id":"self-adhesive-velvet-for-plinths-green","title":"Self Adhesive Velvet for Plinths - Green","description":"\u003cp\u003eThis self adhesive velvet is my own go to way to add that finishing touch to every plinth. Having used many different products over the years, I have found this by far the easiest to use and most forgiving trophy baize on the market. Not only does it look fantastic, it actually helps protect those delicate models by absorbing impact, adding friction and cushioning to stop vibration or movement. It also just feels amazing when handling the plinth.\u003c\/p\u003e\n\u003cp\u003eSupplied in a 165mm x 450mm roll, which will cover up to the largest plinth available in store, and more! One roll will last multiple projects. Unlike other trophy Baize this product does not stretch or distort when applying, it cuts to shape easily and is applied like a sticker.\u003c\/p\u003e\n\u003ch3\u003eHOW DO I APPLY IT?\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThis is the easy (and fun bit) simply flip the velvet over to the paper side, roll the sheet back on itself to flatten. Draw around your plinth then mark a few millimetres smaller, and cut out with scissors or a knife. If you have a circle cutter then its even easier for those round plinths. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce cut simply peel off like a sticker and apply to the underside of your plinth. Its repositionable so if you place it wrong, carefully unpeel and reapply (obviously it will loose stick if handled to many times) Once applied press to ensure a good bond. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCan be applied over an open (hollow) bottom plinths but product may distort over time where unsupported. In this instance strips can be applied around the outside or the inner material cut away and reused for another project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eWHAT ABOUT MAGNETS AND SCREWS?\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eHopefully it goes without saying that magnets and screw inserts should be in place before applying. The high grade N52 magnets we supply will work through this absolutely fine. If you are a fan of screw inserts, carefully cut around them once applied to reveal the insert\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"Default Title","offer_id":55486059250041,"sku":"VELVET-165-450-GRN","price":3.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/files\/20250718_123011.jpg?v=1752842377"},{"product_id":"self-adhesive-velvet-for-plinths-grey","title":"Self Adhesive Velvet for Plinths - Grey","description":"\u003cp\u003eThis self adhesive velvet is my own go to way to add that finishing touch to every plinth. Having used many different products over the years, I have found this by far the easiest to use and most forgiving trophy baize on the market. Not only does it look fantastic, it actually helps protect those delicate models by absorbing impact, adding friction and cushioning to stop vibration or movement. It also just feels amazing when handling the plinth.\u003c\/p\u003e\n\u003cp\u003eSupplied in a 165mm x 450mm roll, which will cover up to the largest plinth available in store, and more! One roll will last multiple projects. Unlike other trophy Baize this product does not stretch or distort when applying, it cuts to shape easily and is applied like a sticker.\u003c\/p\u003e\n\u003ch3\u003eHOW DO I APPLY IT?\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThis is the easy (and fun bit) simply flip the velvet over to the paper side, roll the sheet back on itself to flatten. Draw around your plinth then mark a few millimetres smaller, and cut out with scissors or a knife. If you have a circle cutter then its even easier for those round plinths. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce cut simply peel off like a sticker and apply to the underside of your plinth. Its repositionable so if you place it wrong, carefully unpeel and reapply (obviously it will loose stick if handled to many times) Once applied press to ensure a good bond. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCan be applied over an open (hollow) bottom plinths but product may distort over time where unsupported. In this instance strips can be applied around the outside or the inner material cut away and reused for another project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eWHAT ABOUT MAGNETS AND SCREWS?\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eHopefully it goes without saying that magnets and screw inserts should be in place before applying. The high grade N52 magnets we supply will work through this absolutely fine. If you are a fan of screw inserts, carefully cut around them once applied to reveal the insert \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"Default Title","offer_id":55486065279353,"sku":"VELVET-165-450-GRY","price":3.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/files\/20250718_122637.jpg?v=1752842446"},{"product_id":"oval-resin-base-insert-display-plinths-45mm-tall","title":"Oval Resin Base Insert Display Plinths - 45mm Tall","description":"\u003cp\u003eThese Oval 45mm tall plinths allow for miniatures to remain on their gaming bases and be seamlessly displayed for competition. These designs have a sunken recess for each of the common base sizes. Once inserted your models base will sit flush with a rim of black resin.\u003c\/p\u003e\n\u003cp\u003eWe produce plinths for the following oval base sizes - 120x95. 105x70, 90x52, 75x45 and 60x35. Each plinth has a 2.5mm rim so will be around 5mm larger in diameter than each base. Some sizes have been designed hollow, this serves to reduce weight and aid shipping. Bases will span this hollow section when inserted, hollow plinths are noted in the drop down menu. We recommend using sticky tac or putty to temporally hold your model in place.\u003c\/p\u003e\n\u003cp\u003ePlastic bases can vary in size by a few millimetres depending on manufacturer, we check each casting popular production bases when cast. Paint build up on base rim will affect the fit, and may require you to adjust the rim by sanding the leading edge. Bases not included\u003c\/p\u003e\n\u003cp\u003eThe finished height is approximately 45mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. Cast in strong black pigmented resin. After casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\" title=\"inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"120mm x 95mm Oval Base - Hollow","offer_id":63987954057593,"sku":"DIS-OVAL-120-BASE-INSERT","price":22.0,"currency_code":"GBP","in_stock":true},{"title":"105mm x 70mm Oval Base - Hollow","offer_id":63987954090361,"sku":"DIS-OVAL-105-BASE-INSERT","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"90mm x 52mm Oval Base - Hollow","offer_id":63987954123129,"sku":"DIS-OVAL-090-BASE-INSERT","price":19.0,"currency_code":"GBP","in_stock":true},{"title":"75mm x 45mm Oval Base - Hollow","offer_id":63987954155897,"sku":"DIS-OVAL-075-BASE-INSERT","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"60mm x 35mm Oval Base","offer_id":63987954188665,"sku":"DIS-OVAL-060-BASE-INSERT","price":16.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/files\/20260716_151655GOOD.jpg?v=1784215349"},{"product_id":"rectangular-resin-base-insert-display-plinths-45mm-tall","title":"Rectangular Resin Base Insert Display Plinths - 45mm Tall","description":"\u003cp\u003eThese Rectangular 45mm tall plinths allow for miniatures to remain on their gaming bases and be seamlessly displayed for competition. These designs have a sunken recess for each of the common base sizes. Once inserted your models base will sit flush with a rim of black resin.\u003c\/p\u003e\n\u003cp\u003eWe produce plinths for the following rectangular base sizes - 60x100. 50x100, 50x75, 40x60, 30x60 and 25x50. Each plinth has a 2.5mm rim so will be around 5mm larger in diameter than each base. Some sizes have been designed hollow, this serves to reduce weight and aid shipping. Bases will span this hollow section when inserted, hollow plinths are noted in the drop down menu. We recommend using sticky tac or putty to temporally hold your model in place.\u003c\/p\u003e\n\u003cp\u003ePlastic bases can vary in size by a few millimetres depending on manufacturer, we check each casting popular production bases when cast. Paint build up on base rim will affect the fit, and may require you to adjust the rim by sanding the leading edge. Bases not included\u003c\/p\u003e\n\u003cp\u003eThe finished height is approximately 45mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. Cast in strong black pigmented resin. After casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\" title=\"inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"60mm x 100mm  Rectangular Base - Hollow","offer_id":63988100923769,"sku":"DIS-REC-60100-BASE-INSERT","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"50mm x 100mm  Rectangular  Base - Hollow","offer_id":63988100956537,"sku":"DIS-REC-50100-BASE-INSERT","price":19.0,"currency_code":"GBP","in_stock":true},{"title":"50mm x 75mm Rectangular  Base - Hollow","offer_id":63988100989305,"sku":"DIS-REC-5075-BASE-INSERT","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"40mm x 60mm  Rectangular  Base - Hollow","offer_id":63988101022073,"sku":"DIS-REC-4060-BASE-INSERT","price":16.0,"currency_code":"GBP","in_stock":true},{"title":"30mm x 60mm  Rectangular  Base","offer_id":63988101054841,"sku":"DIS-REC-3060-BASE-INSERT","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"25mm x 50mm  Rectangular  Base","offer_id":63988131889529,"sku":"DIS-REC-2550-BASE-INSERT","price":13.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/files\/20260716_152415GOOD.jpg?v=1784216044"},{"product_id":"square-resin-base-insert-display-plinths-45mm-tall","title":"Square Resin Base Insert Display Plinths - 45mm Tall","description":"\u003cp\u003eThese Square 45mm tall plinths allow for miniatures to remain on their gaming bases and be seamlessly displayed for competition. These designs have a sunken recess for each of the common base sizes. Once inserted your models base will sit flush with a rim of black resin.\u003c\/p\u003e\n\u003cp\u003eWe produce plinths for the following Square base sizes - 50mm, 40mm, 30mm and 25mm. Each plinth has a 2.5mm rim so will be around 5mm larger in diameter than each base. Some sizes have been designed hollow, this serves to reduce weight and aid shipping. Bases will span this hollow section when inserted, hollow plinths are noted in the drop down menu. We recommend using sticky tac or putty to temporally hold your model in place.\u003c\/p\u003e\n\u003cp\u003ePlastic bases can vary in size by a few millimetres depending on manufacturer, we check each casting popular production bases when cast. Paint build up on base rim will affect the fit, and may require you to adjust the rim by sanding the leading edge. Bases not included\u003c\/p\u003e\n\u003cp\u003eThe finished height is approximately 45mm once machined, this height can vary plinth to plinth but I always aim to match finished heights across multiple plinths in an order. Cast in strong black pigmented resin. After casting each plinth is machine sanded to ensure the top and bottom surfaces are parallel and true. I inspect each plinth and fill and sand any imperfections, although sometimes I miss things.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.taromodelmaker.com\/products\/plinth-inserts\" title=\"inserts\"\u003eNow offering Magnet or Screw inserts for your plinths\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCTION - PLEASE READ!\u003c\/h3\u003e\n\u003cp\u003eDue to the amount of resin required to produce these plinths they will be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecast to order\u003c\/strong\u003e. This can mean a lead time of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eup to a week\u003c\/strong\u003e\u003cspan\u003e prior to shipping.\u003c\/span\u003e I would always recommend ordering ahead of time if you require them for a competition. \u003cspan\u003eI will always strive to cast items immediately and aim to get orders out the next day. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYour plinths may arrive in a sanded and prepared state, each and every plinth I cast is meticulously inspected for imperfections these are then filled and sanded out. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to use it is recommended to clean each piece is warm soapy water to remove residue release agent. Persistent release and silicone residue will remove with spirit based fluid and an old tooth brush. Wash in water after using spirit based cleaners. If any small bubbles are present they can be filled with superglue applied from a pin tip and sanded back. Always \u003cstrong\u003ewet sand\u003c\/strong\u003e resin using fine grit wet and dry, sanding from course to fine paper to remove surface marks (240, 320, 400, 600 grit for example). I would always recommend spraying your plinth in a flat coat of black to even out the colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDISCLAIMERS\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThis web store and its contents is owned and run by Taro Modelmaking Ltd, an independent company producing third-party kits and accessories for wargaming and scale miniatures. All product images are for illustrative purposes only, used to demonstrate compatibility and scale with popular 28mm tabletop systems. Demonstration models shown can be purchased elsewhere and are not manufactured by Taro Modelmaking Ltd.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe products sold on this website are designed and manufactured by Taro Modelmaking Ltd\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eChoking hazard. Not meant for children 16 years or younger.\u003cbr\u003eEvery effort is taken to prevent bubbles, although some small bubbles may remain. All measurements are approximate due to resin shrinkage as environmental conditions change during the casting process. Heights are Approximate and can vary each way by a few millimetres. Supplied unpainted\u003c\/p\u003e","brand":"Taro Modelmaker","offers":[{"title":"50mm Square Base - Hollow","offer_id":63988213842297,"sku":"DIS-SQ-050-BASE-INSERT","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"40mm Square Base","offer_id":63988213875065,"sku":"DIS-SQ-040-BASE-INSERT","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"30mm Square Base","offer_id":63988213907833,"sku":"DIS-SQ-030-BASE-INSERT","price":9.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Square Base","offer_id":63988213940601,"sku":"DIS-SQ-025-BASE-INSERT","price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/9583\/3989\/files\/20260716_152157GOOD.jpg?v=1784217169"}],"url":"https:\/\/www.taromodelmaker.com\/collections\/display-products.oembed?page=4","provider":"Taro Modelmaker","version":"1.0","type":"link"}